How to use diamond wire saw cutting machine

The use of diamond wire saw cutting machine mainly includes the following steps:
Preparation :
Put the device in a stable position and adjust the wheel knob to ensure that the device is stable.
Connect the air compressor air pipe, equipment power supply and air compressor power supply, and turn on the main power switch.
On-line operation:
Install the diamond wire correctly on the machine according to the instructions, making sure that the wire passes through the trunking of all wheels and is in the same direction.
Perform multiple wire tightening operations to ensure that the diamond wires are tensioned and evenly arranged.
Setup & Testing :
Set cutting parameters such as spindle speed, wire diameter, etc. on the operation interface.
Conduct a start-up test to observe the winding progress and line position to ensure that the equipment is operating normally.
Cutting operation :
The workpiece is fixed on the sample stage and the appropriate cutting parameters are set.
Start the device, perform the cutting operation, and observe the cutting progress and effect.
‌