Ultra Thin Multi Wire Saw Machine

Multiwire Machine

 

 

The Super Thin Multi Wire Saw Machine HLMW-100/150, manufactured by HUALONG, is a multi-wire stone cutting machine that uses a series of diamond wires to perform block cutting for the industrial production of granite and marble slabs.

Compared with traditional diamond wire saw or gang saw stone cutting equipment, the multi wire saw block stone cutting machine has significant advantages:

High yield rate: The yield rate of micro wire saws with cutting grooves of only 0.4-0.7mm can reach more than 97%, which is 15-20% higher than traditional rope or frame saws. This means that with the same stone raw materials, more plates can be obtained by using HLMW-100/150, reducing material waste. More importantly, it improves economic benefits.

 

Multi Wire Cutting Machine

 

The new machine of HLMW-100/150 ultra-thin multi-wire saw, developed by Hualong Machinery, highlights its advancement in stone cutting technology:

 

The next generation of stone block cutting technology: HLMW-100/150 ultra-thin multi-wire saw represents a new generation of cutting technology, which significantly improves the efficiency and accuracy of stone block cutting.

Ultra-fine diamond wire: Using 0.3-0.8mm fine diamond wire, it can achieve precise cutting and reduce waste.

High Yield: With a yield rate of over 97%, this machine is more efficient than traditional equipment.

 

Stone Cutting Wire Saw Machine

 

When cutting stone with traditional tools such as saw blades, saw belts or beaded wire saws, the kerf width is generally between 3 and 10 mm, while the kerf width of wire saws is only 0.5 mm, which greatly improves the cutting accuracy and the yield rate can reach up to 98%. For example, if 1 cubic meter of fish belly white stone is cut into 1.8 cm thick slices, it can be cut into 46 slices using traditional sawing, while 53 slices can be cut using stone wire saws. It can be seen that the application of this technology can not only improve the capacity utilization rate of the stone industry, but also bring higher economic benefits to users.

1: The cutting saw seam is only 0.5~0.7mm, which is much lower than the existing stone machining saw seam (3~9mm), 6-9 times smaller, and the yield rate is increased by 15-30%

2: Ultra-thin large plates can be cut directly from the rough material, with a processing size of 3000*1000*1000mm. As long as the hardness of the stone allows, the thinnest can even be less than 1mm

3: The mechanical noise during production is much lower than that of traditional stone machines, and the wastewater and waste residue generated during the processing process are reduced by more than 85%

4: The floor space of traditional stone cutting machines is reduced by 50%, and the flatness is increased by 50%.

5: The cutting accuracy of multiple wire saws is +-0.1mm, but that of multi-strand rope saws is +-0.5-1mm

6: One-piece molded castings, with a streamlined and more stable structure, lower failure rate, and lower maintenance cost

7: Lower cutting cost: cheaper wires, lower total power, and more energy-saving

Hualong Stone Machinery Equipment Co., Ltd. is located in the Huangshi Industrial Park in the historic town of Putian City, covering an area of ​​nearly 30,000 square meters. The company is a professional manufacturer of stone machinery and equipment integrating scientific research, design, production, sales and after-sales service. The company has successively passed ISO9001:2000 and other related quality management system certifications, ISO14001:2105 environmental management system certification and the assessment of the integration of industrialization and information technology management system. Hualong has the independent right to export products. The company has stone machinery processing workshops, production workshops, fitter workshops, assembly workshops, paint and rust removal workshops, electrical assembly workshops, etc.

Hualong Company has multiple departments, such as sales department, production department, foreign trade department, technical department, quality inspection department, after-sales service department and other perfect management systems. At the same time, it has more than 30 high and intermediate technical personnel related to stone machinery production. The company has been engaged in the production of stone machinery and equipment for more than 30 years, and has long hired many foreign technical experts and professors from well-known domestic universities as the company's special technical consultants. The various stone cutting machines and stone processing equipment produced by the company are widely used in many fields such as stone processing plants. Hualong stone machinery products have been recognized by many industries. At present, Hualong's stone machinery is exported to Italy, Saudi Arabia, Thailand, Myanmar, Indonesia, Colombia, Japan, Dominican Republic, Mexico and other countries, and has been recognized by the majority of users.

As one of the most professional ultra thin multi wire saw machine manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to buy customized ultra thin multi wire saw machine made in China here from our factory.