It cuts blocks with a yield rate of over 98% using 0.3-0.8mm fine diamond wire.
Main features
The cutting precision of Hualong multiwire machine is mainly reflected in the following aspects：
Thickness precision:
The diameter of diamond wire can be adjusted between 0.3-0.8 millimeters, it can cut stone with a thickness of 5-30 millimeters, and the thickness of the cut stone is uniform, and the error of the stone cutting thickness can be controlled within a small range, which belongs to a higher level of precision in the industry, and it can meet the fields of architectural decorations, handicrafts production and other fields that have a high demand for the thickness precision of the stone.
Surface flatness precision:
The cut stone surface is flat, without obvious unevenness, wavy or scratches and other defects. This makes the cut stone can be directly used in various application scenarios without excessive subsequent grinding and processing procedures, which can greatly improve processing efficiency and product quality.
Sawing precision:
Compared with traditional stone cutting equipment and some other brands of multi-wire saw, Hualong multiwire sawing slit is significantly reduced, the traditional stone cutting most of the circular saw blade or gangsaw, will be formed in the stone sawing slit 3-8 mm, and Hualong multiwire machine can make the sawing slit control in a very small range, which greatly saves the stone material..
Technichal:
The biggest problem with multi-wire saws is that they often break. How does Hualong solve this problem?
Due to the different quartz content of natural marble, it is indeed easy to break the wire, and it takes a lot of time to connect the wires. However, due to the unique design of Hualong's machines, it can be easily welded and connected, and then continue cutting. It can save a lot of time.
The cutting diameter of multi-wire saws compared with traditional cutting tools is as follows:
|
multi wire saw |
Diameter-0.55mm |
| diamond wire saw |
Diameter-5.3 - 7.3mm |
|
Gang saw |
Diameter-2.2 - 3.5mm |
Since the wire with a diameter of 0.55mm is used, the surface of the marble after cutting can be smoother. The flatness is controlled within +/-0.3mm. This also reduces the abrasive consumption of the polishing machine in the future.
For some factories that often process expensive imported marble, the greater the output, the greater the profit. Because compared with other rough material cutting machines, this machine has a higher output(90 pieces/m for 1,08 cm thick boards).
workshop
Hot Tags: multi wire gangsaw, China multi wire gangsaw manufacturers, suppliers, factory, multi wire saw machine, Multi Wire Saw Granite Cutting Machine, Multiwire Saw Machine, Wire Saw Machine
