Multiwire For Marble Granite Cutting

The diameter of the diamond wire can be adjusted between 0.3-0.8mm, and it can cut ultra-thin stones with a thickness of 5-30mm. The surface of each stone cut is flat and the thickness is uniform. The saw seam is significantly reduced, which greatly saves the raw stone materials.

The multi-wire saw can operate multiple cutting wires at the same time, and can cut the workpiece into up to hundreds of thin slices at a time. Compared with the traditional stone cutting method, the production efficiency is significantly improved.

The unique installation frame, roller configuration and rotary drive device design make the overall structure of the equipment more stable, and the roller disassembly and assembly are more convenient, which reduces the failure rate of the equipment and reduces the maintenance time and cost.

Due to the small saw seam, for 1 cubic meter of stone, only 40 slices can be sawed by traditional methods, while the diamond wire saw of Hualong ultra-thin multi-wire saw can saw more than 50 slices, and the material yield rate is greater than 97%, especially when cutting expensive stones, it can greatly reduce losses and save costs.

It solves the problem of large sawing gaps and large amounts of wastewater, waste residue and dust generated by traditional stone processing tools, and is more in line with environmental protection requirements.